Found object piece using repurposed wood, wine corks, and metal pieces. Measure 40" x 36".
Steel piece in a copper frame - design hand-cut into both with a plasma torch. Measures 27.5" x 27.5" x 1" deep.
Design hand-cut into an aluminum tray with steel accents. Hearts/lips are red (hard to see in photo). Measures 27.5" x 23" CURRENTLY FOR SALE AT THE NASHOBA VALLEY WINERY.
Found object sculpture on reclaimed wood, including acorns, honeycomb, steel pieces, faux ivy hair, birds nest, faux eggs, and grapevine. Measures 18" x 37"
A huldre, in Norwegian folklore, is one of the "other folk." She appears as a beautiful woman, often observed dancing by a waterfall, and lures human men into the woods...often to never be seen again. She can be identified as a huldre by her tail.
Design hand-cut into steel and applied to a hard plastic tray. Measures 22" x 27"
Aegir is the norse goddess of beer, mead, wine. Found object sculpture on repurposed wood, including wine corks, beer coasters and cap, bottle opener, and dried hops. Measures 18" x 32" (minus the tail).
A huldre, in Norwegian folklore, is one of the "other folk." She appears as a beautiful woman, often observed dancing by a waterfall, and lures human men into the woods...often to never be seen again. She can be identified as a huldre by her tail.
Found object sculpture on repurposed wood. Her bell rings! She also has steel pieces, copper oil spoutsgold-colored ties for hair, and a brass knob. Measures 18" x 31.5".
A huldre, in Norwegian folklore, is one of the "other folk." She appears as a beautiful woman, often observed dancing by a waterfall, and lures human men into the woods...often to never be seen again. She can be identified as a huldre by her tail.
Rudolph design hand-cut into an aluminum saucer sled with my plasma torch. Red steel cardinals (and nose) and rusty steel eye accents.
Winterberry goddess design hand-cut into an aluminum saucer sled with my plasma torch. Red, green and rust-colored steel accents. Measures 25.5" diameter.
Design hand-cut into an aluminum tray with a plasma torch. Accents include aluminum and copper flowers, and leaves created with colorful fabric. Measures approx. 24" x 30" x 1"
CURRENTLY AT 6 BRIDGES GALLERY IN MAYNARD, MA
Spiral tree design hand-cut into an antique shovel (with solid wood "D" handle) with a plasma torch.
CURRENTLY AT 6 BRIDGES GALLERY IN MAYNARD, MA
Design cut into steel and inserted into a barnwood frame. Fabric leaf accents. Measures approx. 21 x 31"
Luna moth design hand-cut into an aluminum shovel (painted luna moth green - inspiring the piece) with extra long handle (4 feet long - handle alone).
"Curly" heart design hand-cut into steel with a plasma torch. Red steel heart hanging in center. Varies in sizes and prices.
Firebowls made out of condemned propane tanks. Can be used with a real wood fire (if painted, the paint will shed with the heat), or as a year-round jack-o-lantern with a oil patio candle (e.g. tabletop tiki torch). Also nice as a planter. Various designs.
Luna moth design hand-cut into an antique shovel (with a solid-wood split handle).
Great horned owl perched in a tree design hand-cut into a shovel with a plasma torch.
CURRENTLY FOR SALE AT FIVE CROWS IN NATICK, MA.
Birch entwife design hand-cut into steel, treated with off-white paint and vinegared rust patterns like birch bark. Set in a barnwood frame. Red steel accents. Measures 24" x 59"
Design hand-cut into a retired fuel tank with a plasma torch. Can be used as a trellis, a wood holder, or converted into a bench.
Goddesses hand-cut into fan blades with a plasma torch. Measures approx. 24" diameter.
Design hand-cut into a stainless tray with a plasma torch. Measures approx. 18" x 24"
Design hand-cut into a shovel with a plasma torch.
CURRENTLY AT PERIWINKLE GLASSWORKS IN ACTON, MA
Design hand-cut into a shovel with a plasma torch.
CURRENTLY AT PERIWINKLE GLASSWORKS IN ACTON, MA
Design hand-cut into a shovel with a plasma torch.
CURRENTLY AT PERIWINKLE GLASSWORKS IN ACTON, MA
Mixed media piece - steel, pottery, and barrel lid. Measures 18" diameter.
Painted turtle design hand-cut into a shovel with a plasma torch. Currently at Five Crows in Natick.
Mixed media piece with steel, collage, paint, wood base, and pottery face. Measures approx. 19" wide x 30".
Design hand-cut into an aluminum pan, with many keys added as dreadlocks. Measures 8" diameter.
Design hand-cut into a steel tabletop with a plasma torch. Measures 43.5" x 27" x 1" deep. Currently at Avenue C at Eastleigh Farm in Framingham.
Design hand-cut into a shovel with plasma torch.
Hand-cut design in steel, with aluminum flower accents and gear mouth. Measures approx. 24" x 20".
Fire spirits design hand-cut into a propane tank with a plasma torch. Can be used as an outdoor lantern with candle, or small wood fire, or as a planter.
Tree design handcut into 5 handsaws, and linked together with chainlinks. Measures 22" x 31"
Design hand-cut into steel and set in a barnwood frame. Measures 45 x 31".
Found object sculpture wiht driftwood, steel scrap, and clock parts. Measures approx. 12" x 18".
Found-object sculpture. Measures approx. 10" x 14".
Rudolph design hand-cut into a steel heart (with red steel nose).
Tree design hand-cut into 5 saws, and nailed to two thin pieces of barnwood. Currently for sale at the Nashoba Winery.
Design hand-cut into a shovel with a plasma cutter torch. Currently at Avenue C at Eastleigh Farm in Framingham.
Steel tree, steel sun, metal accents, and watch faces all on a white wood shutter. Measures approx. 20" x 36". Currently for sale at the Nashoba Valley Winery.
Design hand-cut into a retired fuel tank, with wood bench (adirondock-style) inside created from repurposed wood.
Design hand-cut into a steel table top Measures 42" diameter.
Design hand-cut into an aluminum tray, with steel and copper accents. Measures 22" x 27"
Found object sculpture, with pottery face and my metal scrap cutouts on a piece of 1.75" thick driftwood. Approx. 7" x 12" x 1.75"
Found object sculpture with a stainless steel mixing bowl base. Measures 19" x 19" x 8"...although these measurements are somewhat subject depending on her hair!
Blooming heart design hand-cut into an aluminum tray with a plasma cutter. Steel accents. Measures 22" x 27"
Steel design hand-cut and applied to a repurposed piece of wood. Measures 39" x 32"
A combination of repurposed wood and metal. Measures 17" x 34".
A huldre, in Norwegian folklore, is one of the "other folk." She appears as a beautiful woman, often observed dancing by a waterfall, and lures human men into the woods...often to never be seen again. She can be identified as a huldre by her tail.
Heart Tree Mandala design hand-cut into an aluminum saucer sled with my plasma torch. Red steel heart accents. Measures 25.5" diameter.
My "Let It Snow" design on an aluminum saucer sled, hand-cut with my plasma torch. 25.5" diameter.
Moon tree design hand-cut into an antique shovel (with solid wood split handle) with a plasma torch.
Father Nature design hand-cut into a handsaw with a plasma torch.
Spiral tree design hand-cut into an aluminum tray with a plasma torch. Red steel heart accent on the trunk of the tree. Measures approx. 24" x 30"
Mother Nature design hand-cut into a hand-saw with a plasma torch.
Blooming do design hand-cut into a shovel with a plasma torch.
Tree spirit design hand-cut in steel and welded together. Measures 43" x 47."
Lobstah design hand-cut into a shovel with a plasma torch.
Design hand-cut into steel and inserted into a barnwood frame. Accents include copper flowers, aluminum flowers, and fabric leaves. Measures approx. 31" x 31"
Spiral tree design hand-cut into a steel heart with a plasma torch. Measures approx. 18 x 24 inches.
Rooster design hand-cut into a shovel with a plasma torch.
Spiral tree with owl design hand-cut into a sheet of steel. Measures approx. 48" x 60"
Mask created with a hubcap, winecorks, and found objects. Measures approx. 24 x 24.
Design hand-cut into steel and welded together. Stainless steel star accents. Measures 37" x 28" - can be bent outward to be more 3-D.
Blooming goat design hand-cut into a shovel with a plasma torch.
Birch design hand-cut into a piece of steel, treated with off-white paint and vinegared to rust in birch bark patterns. Measures 23" x 48".
Sun goddess design.
35" pagan fire ring design hand-cut into steel ring with plasma torch.
Designs hand-cut into steel with a plasma torch and added to farm gate.
Steel designs hand-cut with a plasma cutter and attached to gate.
Entwife trellises hand-cut with plasma torch in steel and installed on a pergola. Various sizes.
Decorated truck for spring parade during Covid-19
Mermaid design hand-cut and welded using an old car hood and steel.
Astrological designs hand-cut into a windmill (that turns) with a plasma torch. Measures approx. 24" diameter.
Tree hand-cut with a plasma torch in steel.
Mermaid design hand-cut and welded using an old car hood and steel. Measures approx. 72" x 100"
Design hand-cut into steel and a trunk hood for a VW Bug. Installed and purchased by ArtSpace Maynard. Look for her on the front wall of the building.
Design hand-cut into steel and inserted into barnwood frame. Measures approx. 31" x 46'.
Design hand-cut into a repurposed sheet of steel (rough cuts due to light enamel coating). Measures approx. 40" x 44"