Design hand-cut into steel with a plasma torch and inserted into a barnwood frame. Has steel, watch parts, and other found object accents. Measures 20" x 30".
This piece is available for sale in my booth at Knotty Pine Design at the Landing in Hudson, MA.
Mixed media/found object piece using a cupboard door as a base, with keys and metal bits creating the design. Measures approximately 24" x 16".
This piece is available for sale in my booth at Knotty Pine Design at the Landing in Hudson, MA.
Mixed media piece created with a hubcap, copper accents, pieces cut from a dryer vent, and red steel heart. Measures approx. 19" diameter.
This piece is for sale at the Nashoba Valley Winery in Bolton, MA.
Mixed media piece made with a metal lid, metal accents, wine corks, crystal beads for eyes, and beads. Measures 20" x 12".
Two lovely mixed-media vikings designed to handle the outdoor elements and hang out in your garden. Used copper, dryer vent aluminum, old belt, steel and crystal eye accents...all on two steel mannequins.
Mixed-media mask created using a metal lid, wine corks, beads, and metal scrap. Measures 20" x 12"
This piece is available for sale at my booth at Knotty Pine Design & Consignment at the Landing in Hudson , MA.
Sunflower created with mixed media (copper pieces, red steel heart, aluminum vent material) on an old hubcap.
This piece is available for sale at the Nashoba Valley Winery in Bolton, MA.
Acorn man design created with steel pieces, faux branches and acorns on a wood tray with handle. Measures 17" x 31"
Acorn woman design created using steel pieces and faux branches and acorns on a wood tray with a handle. Measures 19" x 24"
Huldre design created with metal pieces, beads, a door knocker, clock parts, telephone ringer, and conduit on an old door. Measures 23" x 53"
A huldre, in Norwegian folklore, is one of the "other folk." She appears as a beautiful woman, often observed dancing by a waterfall, and lures human men into the woods...often to never be seen again. She can be identified as a huldre by her tail.
Part of my 'recycling goddesses" series, this piece was created with leftover paint/paint brushes from a adirondock chair project. She is made of steel pieces, paint brushes, and paint on a piece of recycled board from a bathroom remodel. Measures 22" x 17"
THIS PIECE IS AVAILABLE FOR SALE AT KNOTTY PINE DESIGN & CONSIGNMENT, LOCATED AT THE LANDING IN HUDSON, MA.
Part of the recycled materials goddess series. Nephro is created using steel pieces and objects (including lobster trap bait bags) that were found on beaches in Maine. She's created on a wood tray. Measures 19" x 24"
THIS PIECE IS AVAILABLE FOR SALE AT KNOTTY PINE DESIGN & CONSIGNMENT, LOCATED AT THE LANDING IN HUDSON, MA.
Aegir is the norse goddess of beer, mead, wine. Found object sculpture on repurposed wood, including wine corks, beer coasters and cap, bottle opener, and dried hops. Measures 18" x 32" (minus the tail).
A huldre, in Norwegian folklore, is one of the "other folk." She appears as a beautiful woman, often observed dancing by a waterfall, and lures human men into the woods...often to never be seen again. She can be identified as a huldre by her tail.
Found object sculpture on reclaimed wood, including acorns, honeycomb, steel pieces, faux ivy hair, birds nest, faux eggs, and grapevine. Measures 18" x 37"
A huldre, in Norwegian folklore, is one of the "other folk." She appears as a beautiful woman, often observed dancing by a waterfall, and lures human men into the woods...often to never be seen again. She can be identified as a huldre by her tail.
Found object sculpture on repurposed wood. Her bell rings! She also has steel pieces, copper oil spoutsgold-colored ties for hair, and a brass knob. Measures 18" x 31.5".
A huldre, in Norwegian folklore, is one of the "other folk." She appears as a beautiful woman, often observed dancing by a waterfall, and lures human men into the woods...often to never be seen again. She can be identified as a huldre by her tail.
Design hand-cut into an aluminum pan, with many keys added as dreadlocks. Measures 8" diameter.
Mixed media piece with steel, collage, paint, wood base, and pottery face. Measures approx. 19" wide x 30".
Mixed media piece - steel, pottery, and barrel lid. Measures 18" diameter.
Steel tree, steel sun, metal accents, and watch faces all on a white wood shutter. Measures approx. 20" x 36".
CURRENTLY AT KNOTTY PINE DESIGN & CONSIGNMENT, THE LANDING IN HUDSON, MA.
Gypsy girl design hand-cut with a plasma cutter torch in steel, and applied to a panel of steel-bordered wood. Hand-built clay beads and other dangles as accents. Measures 29.5" x 27.5".
Found-object piece with base of beaver-chewed wood. Measures 4.5" x 20"
Found-object art piece with old barrel top base. Measures 20" x 27"
Mixed media piece using a galvanized lid as base, with steel and wine cork accents. Measures 27" x 33".
This piece is available for sale in my booth at Knotty Pine Design at the Landing in Hudson, MA.
Part of the recycled materials goddess series. Pat Caps is made of steel pieces and plastic repurposed caps on an old cupboard door. Measures 26" x 16"
THIS PIECE IS AVAILABLE FOR SALE AT KNOTTY PINE DESIGN & CONSIGNMENT, LOCATED AT THE LANDING IN HUDSON, MA.
Part of the recycled materials goddess series. Elements Enids is created using steel pieces, a recycled scarf, and her hair is made from retired kiln elements. She's created on a wood board with handle. Measures 17" x 31"
THIS PIECE IS AVAILABLE FOR SALE AT KNOTTY PINE DESIGN & CONSIGNMENT, LOCATED AT THE LANDING IN HUDSON, MA.
Found object piece using repurposed wood, wine corks, and metal pieces. Measure 40" x 36".
Maude was purchased and is on display in the lobby of THE LANDING, in Hudson, MA.
Found object sculpture with a stainless steel mixing bowl base. Measures 19" x 19" x 8"...although these measurements are somewhat subject depending on her hair!
Found object sculpture, with pottery face and my metal scrap cutouts on a piece of 1.75" thick driftwood. Approx. 7" x 12" x 1.75"
A combination of repurposed wood and metal. Measures 17" x 34".
A huldre, in Norwegian folklore, is one of the "other folk." She appears as a beautiful woman, often observed dancing by a waterfall, and lures human men into the woods...often to never be seen again. She can be identified as a huldre by her tail.
Mask created with a hubcap, winecorks, and found objects. Measures approx. 24 x 24.
Found-object sculpture. Measures approx. 10" x 14".
Found object sculpture wiht driftwood, steel scrap, and clock parts. Measures approx. 12" x 18".
Hand-built in low-fire clay and hand-painted with colorful glazes. Finds from beach-combing added as accents. Measures 9" x 16"
Found object mask - created with base of half a gourd, wine cork dreadlocks with hand-built clay beads, and metal eye mask. Measures 13" x 12"
Found object sculpture with an old car light shield as the base. Measures 14" x 13". Currently for sale at the Nashoba Valley Winery.
Face is hand-built in low-fire clay and hand-painted with glaze, background is a rubber jewelry press. Measures 9" diameter..
Face is hand-built in low-fire clay and hand-painted with glaze. Tree body and spiral are hand-cut out of steel with a plasma cutter torch. Background is a slate shingle, and hair is driftwood. Measures 10" x 16".
Found object sculpture - base is half a lobster buoy, and face is created with found objects including a bone, shells, watch parts, rope, and hand-built clay beads. Measures 9" x 15"
Found object sculpture - base is half a lobster buoy, and face is created with found objects including smaller buoys and beach finds. Measures 7" x 13". Currently for sale at the Nashoba Valley Winery.
Hand-built clay accents added to a piece of driftwood. Measures 4" x 40"
Found-object mask. Measures 12 x 30"
Found object mask. Measures 11 x 19.5".
Found object sculpture, created with metal pieces (scraps) and wood. Measures approx. 7" x 12"
Found object piece made of metal scraps and wood. Measures approx. 12" x 14" x 1"
Found object sculpture with copper lid, aluminum sheet pan, and other metal accents. Measures 18" x 25.5" tall plus 4" for string/holder
Found-object sculpturemade of wood pieces and pottery. Measures 15" x 33"
Found object sculpture. Measures approx. 24" x 24"
Found object sculpture. Measures approx. 13" x 13".
Found object sculpture. Mostly bark and wood, with some pottery (eye) and metal. Measures approx. 10" x 18"
Found object sculpture. Measures apprx. 20" diameter.
Found object sculpture. Hand saw as base. Measures approx. 6" x 21"
Found object sculpture with coral, driftwood, and shells. Part of my BEACH FINDS series.
Found object sculptue using a stovetop burner pan, winecorks, and metal found objects.
Found-object sculpture with dried flowers created on a car headlamp reflector. Measures approx. 12" diameter.
Part of my BEACH FINDS Series. Found object scultpure with driftwood, lobster molt, sea urchin skeleton, coral, shells, metal and stones. Measures approx. 10" x 16".
Found object scupture - part of my BEACH FINDS series. Created with driftwood, sponges, stones, coral and shells. Measures approx. 16" x 30".
Found object sculptue - part of my BEACH FINDS series. She's created with a natural sponge, sea urchin skeletons, shells, a spoon, beach stones, turtle plastron, and low-fire pottery tail and fish. Quite the beauty! Approximately 16" x 24" x 3".
Created out of the top of a keg, Vivienne is a mix of wine cork dreads, hand-cut lips and eyes, and a "occupied/open" nose. Measures approximately 24" x 24".
Found object sculpture in my BEACH FINDS Series. Bones, driftwood, and stones are used.
Mask created with found objects. Measures approximately 26 x 26 x 4".
Mask created of found objects. Measures approx. 9 x 14".
Found object sculpture of an owl, using an old street lamp as a base. Measures approx. 20 x 32 x 6"