Lobster design hand-cut into red-painted shovels with a plasma torch.
This piece is for sale in my booth at Knotty Pine Design in Hudson (MA).
Mermaid mobiles - pieces hand-cut from steel with a plasma torch and assembled with fishing gear to handle the outdoor weather. Various sizes - but roughly 10" x 27"
This piece is currently for sale at Knotty Pine Design & Consignment in the Landing in Hudson MA.
Lobstah design hand-cut into an old red tray with a plasma torch. Measures 9" x 14"
This piece is currently for sale at Knotty Pine Design & Consignment in the Landing in Hudson MA.
Crab design hand-cut into a galvanized maple syrup bucket top with a plasma torch. Measures 12" x 11" x 3"
This piece is currently for sale at Knotty Pine Design & Consignment in the Landing in Hudson MA.
Lobstah design hand-cut into a galvanized maple syrup bucket top with a plasma torch. Measures 12" x 11" x 3"
This piece is currently for sale at Knotty Pine Design & Consignment in the Landing in Hudson MA.
Lobstah design hand-cut into an old red tray with a plasma torch. Measures 13" x 18"
This piece is currently for sale at Five Crows in Natick (MA).
Lobstah design hand-cut into a red-painted galvanized maple-syrup bucket and made into a hanging lamp. Lamp cord and edison bulb included.
This piece is currently for sale at Knotty Pine Design & Consignment in the Landing in Hudson MA.
Lobstah design hand-cut into a shovel with a plasma torch.
This piece is currently for sale at Knotty Pine Design & Consignment in the Landing in Hudson MA.
Mermaid design hand-cut into a shovel with a plasma torch.
This piece is for sale in my booth at Knotty Pine Design in Hudson (MA).
Design hand-cut into steel and assembled in a barnwood frame. Steel red hanging heart and crystal eye accents. Measures 31" x 45"
This piece is for sale in my booth at the Sudbury Art Association Holiday Market, Nov. 15-Dec. 24, 39 Union Avenue, Sudbury (MA) - 2nd floor above the Carpet Carousel.
Lobstah design hand-cut into a shovel with a plasma torch.
Hand-cut steel heart with mermaid design. Measures 17" x 19"
This piece is currently for sale at Knotty Pine Design & Consignment in the Landing in Hudson MA.
Lobster design hand-cut into an enameled steel tray. Measures 20" diameter.
This piece is for sale in my booth at Knotty Pine Design in Hudson (MA).
Design hand cut into painted steel with a plasma torch. Measures 19" x 60"
Design hand-cut into steel with a plasma torch. Targeted rusting on octopus and hair. Measures 21" x 60"
This piece is for sale in my booth at Knotty Pine Design in Hudson (MA).
Design hand-cut into a shovel with a plasma torch.
This piece is for sale in my booth at Knotty Pine Design in the Landing in Hudson (MA).
Pieces cut in steel with a plasma torch and assembled with fishing gear to create chimes.
This piece is for sale at the Sudbury Art Association's Holiday Market (open Nov. 11 - Dec. 24 every day from 10am - 6pm) at the TJMaxx Plaza in Sudbury - a few doors down from TJMaxx.
Mermaid design hand cut into painted steel with a plasma torch and inserted into a barnwood frame. Oyster shell accents. Measures 31" x 45
This piece is for sale at the Sudbury Art Association's Holiday Market (open Nov. 11 - Dec. 24 every day from 10am - 6pm) at the TJMaxx Plaza in Sudbury - a few doors down from TJMaxx.
Lobstah design cut through and around a chimney tube. Lighting not included. Measures 8.5" diameter by 37" tall.
Mermaid design hand-cut into an old metal drawer with a plasma torch. Measures 24" x 30" x 4".
This piece is available for sale at my booth at Knotty Pine Design & Consignment at the Landing in Hudson , MA.
Mermaid design hand cut with a plasma torch in an old wheelbarrow.
AVAILABLE FOR SALE AT THE SUDBURY ART ASSOC. HOLIDAY MARKET AT SUDBURY PLAZA (IN OLD PAPER STORE LOCATION)- OPEN EVERY DAY THROUGH DEC. 24 (EXCEPT THANKSGIVING), 10AM- 6PM.
Lobstah design hand-cut into a shovel with a plasma torch.
Mermaid design hand-cut and welded using an old car hood and steel.
Mermaid design hand-cut and welded using an old car hood and steel. Measures approx. 72" x 100"
Painted turtle design hand-cut into a shovel with a plasma torch. Currently at Five Crows in Natick.
Design hand-cut into a shovel with a plasma torch.
CURRENTLY AT PERIWINKLE GLASSWORKS IN ACTON, MA
Lobstah design hand-cut into a spade with a plasma-cutting torch. Shovel has a long, straight wood handle.
Lobstahs design hand-cut into a propane tank with a plasma-cutting torch. Can be used as a lantern with an outdoor candle, a small wood fire, or as a planter.
Hand-built in low-fire clay and hand-painted with colorful glazes. Measures 12" x 9"
Hand-built in low-fire clay and hand-painted with colorful glazes, then found objects from the beach added as accents (including driftwood, crab claw, shells). Measures 11" x 19"
Hand-built in low-fire clay and hand-painted with colorful glazes. Finds from beach-combing added as accents. Measures 9" x 16"
Mermaid design hand-cut in steel wtih a plasma cutter torch and added to a barnwood frame. Measures 20" x 30".
"River" design hand-cut into a shovel with a plasma cutter torch.
Hand-built in low fire clay, and hand-painted with colorful glazes. Measures 10" x 16.5"
Found object sculpture - base is half a lobster buoy, and face is created with found objects including a bone, shells, watch parts, rope, and hand-built clay beads. Measures 9" x 15"
Found object sculpture - base is half a lobster buoy, and face is created with found objects including smaller buoys and beach finds. Measures 7" x 13". Currently for sale at the Nashoba Valley Winery.
Mermaid design hand-cut into a shovel with a plasma cutter.
Mermaid design hand-cut into a retired galvanized industrial belt cover, with stain glass, glass buoy, and sea glass accents. LED light strip installed on the interior, with plug and switch. Measures 40" x 23".
Four lobsters design hand-cut into a recycled propane tank with a plasma cutter. Comes with an outdoor torch candle.
A mermaid design hand-cut into a furnace panel with a plasma cutter. Measures approx. 20 x 28 inches.
Fish design hand-cut into a shovel with a plasma cutter.
Fish design hand-cut into an old snow shovel with a plasma cutter.
Steel and stainless steel. Design hand cut into steel, painted, and stainless steel and other accents added. Measures approx. 20" x 36"
Hand-built face out of low-fire white clay, surrounded by driftwood. Measures approx. 14 x 28 x 5".
Mermaid design hand-cut into an antique shovel with a plasma cutter.
Part of my BEACH FINDS Series. Found object scultpure with driftwood, lobster molt, sea urchin skeleton, coral, shells, metal and stones. Measures approx. 10" x 16".
Found object scupture - part of my BEACH FINDS series. Created with driftwood, sponges, stones, coral and shells. Measures approx. 16" x 30".
Found object sculptue - part of my BEACH FINDS series. She's created with a natural sponge, sea urchin skeletons, shells, a spoon, beach stones, turtle plastron, and low-fire pottery tail and fish. Quite the beauty! Approximately 16" x 24" x 3".
Found object sculpture in my BEACH FINDS Series. Bones, driftwood, and stones are used.
Lobster design hand-cut into a red-painted shovel.
I always love making sugar skulls as fall and Day of the Dead approaches. I've also been inspired by the mermaid art I see all around the coastline of Massachusetts (and beyond...)...so I wanted to combine the two! This piece is sold, but I plan on doing many more versions, she was so much fun to work on. She was approximately 84" x 26".