Sunflower goddess with sun and sunflowers hand-cut into a shovel with a plasma torch.
THIS PIECE IS AVAILABLE FOR SALE AT KNOTTY PINE DESIGN & CONSIGNMENT, LOCATED AT THE LANDING IN HUDSON, MA.
Father Nature design hand-cut into a hand saw with a plasma torch.
THIS PIECE IS AVAILABLE FOR SALE AT KNOTTY PINE DESIGN & CONSIGNMENT, LOCATED AT THE LANDING IN HUDSON, MA.
Design hand-cut into a shovel with a plasma cutter torch.
THIS PIECE IS AVAILABLE FOR SALE AT KNOTTY PINE DESIGN & CONSIGNMENT, LOCATED AT THE LANDING IN HUDSON, MA.
Owl design hand-cut into a shovel with a plasma cutting torch.
THIS PIECE IS AVAILABLE FOR SALE AT KNOTTY PINE DESIGN & CONSIGNMENT, LOCATED AT THE LANDING IN HUDSON, MA.
Goddess design hand-cut into steel and installed into a barnwood frame. Stainless steel accents (stars). Measures approx. 24" x 24"
THIS PIECE IS AVAILABLE FOR SALE AT KNOTTY PINE DESIGN & CONSIGNMENT, LOCATED AT THE LANDING IN HUDSON, MA.
Tree design hand-cut into steel with a plasma torch. Hanging red steel hearts as accents. Measures approx. 24" x 30".
THIS PIECE IS AVAILABLE FOR SALE AT KNOTTY PINE DESIGN & CONSIGNMENT, LOCATED AT THE LANDING IN HUDSON, MA.
Trees, moon, and owl design hand-cut into steel with a plasma torch and framed in barnwood. Measures approx. 20" x 30"
THIS PIECE IS AVAILABLE FOR SALE AT KNOTTY PINE DESIGN & CONSIGNMENT, LOCATED AT THE LANDING IN HUDSON, MA.
Honeybee design hand-cut into a shovel with a plasma torch.
THIS PIECE IS AVAILABLE FOR SALE AT KNOTTY PINE DESIGN & CONSIGNMENT, LOCATED AT THE LANDING IN HUDSON, MA.
Mother Nature design hand-cut into a hand saw with a plasma torch.
THIS PIECE IS AVAILABLE FOR SALE AT KNOTTY PINE DESIGN & CONSIGNMENT, LOCATED AT THE LANDING IN HUDSON, MA.
Mother Nature design hand-cut into a shovel with a plasma torch.
THIS PIECE IS AVAILABLE FOR SALE AT KNOTTY PINE DESIGN & CONSIGNMENT, LOCATED AT THE LANDING IN HUDSON, MA.
Spiral Tree design hand-cut into a hand saw with a plasma torch.
THIS PIECE IS AVAILABLE FOR SALE AT KNOTTY PINE DESIGN & CONSIGNMENT, LOCATED AT THE LANDING IN HUDSON, MA.
Skelly Mermaid design hand-cut into steel with a plasma torch. Measures approx. 20" x 48"
THIS PIECE IS AVAILABLE FOR SALE AT KNOTTY PINE DESIGN & CONSIGNMENT, LOCATED AT THE LANDING IN HUDSON, MA.
Design hand cut into an aluminum platter with a plasma torch. Steel accents and painted birds. Measures 27.5" x 23."
THIS PIECE IS AVAILABLE FOR SALE AT KNOTTY PINE DESIGN & CONSIGNMENT, LOCATED AT THE LANDING IN HUDSON, MA.
Design hand-cut into a shovel with a plasma torch.
THIS PIECE IS AVAILABLE FOR SALE AT KNOTTY PINE DESIGN & CONSIGNMENT, LOCATED AT THE LANDING IN HUDSON, MA.
Design hand-cut into an aluminum tray with steel accents. Hearts/lips are red (hard to see in photo). Measures 27.5" x 23" CURRENTLY FOR SALE AT THE NASHOBA VALLEY WINERY.
Found object piece using repurposed wood, wine corks, and metal pieces. Measure 40" x 36".
Steel piece in a copper frame - design hand-cut into both with a plasma torch. Measures 27.5" x 27.5" x 1" deep.
CURRENTLY AT THE BOLTON PUBLIC LIBRARY FOR THE MONTH OF SEPTEMBER AS PART OF THE BOLTON & HARVARD OPEN STUDIOS EXHIBIT.
Aegir is the norse goddess of beer, mead, wine. Found object sculpture on repurposed wood, including wine corks, beer coasters and cap, bottle opener, and dried hops. Measures 18" x 32" (minus the tail).
A huldre, in Norwegian folklore, is one of the "other folk." She appears as a beautiful woman, often observed dancing by a waterfall, and lures human men into the woods...often to never be seen again. She can be identified as a huldre by her tail.
Found object sculpture on reclaimed wood, including acorns, honeycomb, steel pieces, faux ivy hair, birds nest, faux eggs, and grapevine. Measures 18" x 37"
A huldre, in Norwegian folklore, is one of the "other folk." She appears as a beautiful woman, often observed dancing by a waterfall, and lures human men into the woods...often to never be seen again. She can be identified as a huldre by her tail.
Found object sculpture on repurposed wood. Her bell rings! She also has steel pieces, copper oil spoutsgold-colored ties for hair, and a brass knob. Measures 18" x 31.5".
A huldre, in Norwegian folklore, is one of the "other folk." She appears as a beautiful woman, often observed dancing by a waterfall, and lures human men into the woods...often to never be seen again. She can be identified as a huldre by her tail.
Firebowls made out of condemned propane tanks. Can be used with a real wood fire (if painted, the paint will shed with the heat), or as a year-round jack-o-lantern with a oil patio candle (e.g. tabletop tiki torch). Also nice as a planter. Various designs.
Design hand-cut into a steel table top Measures 42" diameter.
Design hand-cut into a retired fuel tank, with wood bench (adirondock-style) inside created from repurposed wood.
Blooming heart design hand-cut into an aluminum tray with a plasma cutter. Steel accents. Measures 22" x 27"
Found object sculpture with a stainless steel mixing bowl base. Measures 19" x 19" x 8"...although these measurements are somewhat subject depending on her hair!
Found object sculpture, with pottery face and my metal scrap cutouts on a piece of 1.75" thick driftwood. Approx. 7" x 12" x 1.75"
Design hand-cut into an aluminum tray, with steel and copper accents. Measures 22" x 27"
A combination of repurposed wood and metal. Measures 17" x 34".
A huldre, in Norwegian folklore, is one of the "other folk." She appears as a beautiful woman, often observed dancing by a waterfall, and lures human men into the woods...often to never be seen again. She can be identified as a huldre by her tail.
Steel design hand-cut and applied to a repurposed piece of wood. Measures 39" x 32"
Tree spirit design hand-cut in steel and welded together. Measures 43" x 47."
Spiral tree with owl design hand-cut into a sheet of steel. Measures approx. 48" x 60"
Crow design hand-cut into black-painted steel scrap. Measures approx. 21" x 31"
5 saws make 1 tree piece - design hand cut with a plasma torch. Measures approx. 40" x 35"
Steel tree, copper moon, white steel clouds and aluminum black crows - all hand-cut with a plasma torch and assembled ina barnwood frame. Measures approx. 31 x 45"
Tree design hand-cut in steel with a plasma cutter torch and add to steel-bordered wood panel. Accents in hand-built clay pieces and watch parts. Measures 29.5 x 27.5"
Design hand-cut into steel pieces and assembled together. Measures 23 x 32"
Horse with flowers design hand-cut into a shovel with a plasma cutter.
Owl in tree design hand-cut into an antique shovel with a plasma cutter. Nice layer of old cement at bottom of tree, like snow!
Goat with flowers design hand-cut into an antique shovel with a plasma cutter.
Bard owl design hand-cut into a shovel with a plasma cutter.
Owl in tree design hand cut into a shovel with a plasma cutter.
Sheep design hand-cut into a shovel with a plasma cutter.
Two trees design, hand cut out of steel with a plasma cutter and set in a barnwood frame. Measures approx. 16" x 24".
Stag with cardinals in antlers design, hand-cut with a plasma cutter, steel and barnwood. Measures 36" x 24"
Great horned owl design hand-cut into a shovel with a plasma cutter.
Happy goat design hand-cut into a shovel with a plasma cutter.
Two trees design hand cut into steel in a barnwood frame. Crescent moon in copper, with small owl. Measures approx. 24" x 36'.
Sheep design hand-cut into a shovel with a plasma cutter.
Heart design hand-cut into steel pieces and assembled together. Measures approx. 15 x 23"
Pieces of steel hand-cut with a plasma cutter and assembled together. Measures 24" x 24".
Tree hand-cut into steel, owl in steel, and moon in copper, assembled on a wood panel. 12" x 24"
Raven harvesting berries design hand-cut into a shovel with a plasma cutter.
Design hand cut in steel, copper, and brass and assembled together in a barnwood frame. Measures 24" x 24".
Privacy panels made of steel and stained glass. Design hand cut into steel panels with a plasma cutter. Measures 15 feet x 10 feet.
Steel pieces hand cut and assembled on old maple tree.
Mother nature design hand-cut into a shovel with a plasma cutter.
Design hand-cut into a galvanized steel platter with a plasma cutter.
Blooming chicken design hand-cut into a shovel with a plasma cutter.
Blooming chicken design hand-cut into a shovel with a plasma cutter.
Design hand cut into steel with a plasma cutter and put into a barn-wood frame. Measures 26 x 26".
Design hand-cut into a shovel with a plasma cutter.